Table 285: Access Point Authentication Failure Status - D-Link DWL-8600AP User Manual

D-Link UWS User Manual
Click the MAC address of the AP to view more information about the AP. If the AP is not a D-Link AP, some
values are unknown.
Field
MAC Address
IP Address
Last Failure Type
Age
Command Buttons
The page includes the following buttons:
• Delete All—Delete the entries for all APs in the failure list.
• Manage—Add one or more selected APs from the Access Point Failure list to the Valid AP database.
• Refresh—Updates the page with the latest information.
D-Link
Oct. 2015

Table 285: Access Point Authentication Failure Status

Description
The Ethernet address of the AP. If the MAC address of the AP is followed
by an asterisk (*), it was reported by a peer switch.
The IP address of the AP.
Indicates the last type of failure that occurred, which can be one of the
following:
• Local Authentication
• No Database Entry
• Not Managed
• RADIUS Authentication
• RADIUS Challenged
• RADIUS Unreachable
• Invalid RADIUS Response
• Invalid Profile ID
• Profile Mismatch-Hardware Type
• AP Relink
Time since failure occurred.
The AP failure status entries are collected at a point in time and
eventually age out. The age value for each entry shows how long ago the
switch recorded the entry. You can configure the age out time for status
entries on the WLAN > Administration > Advanced Configuration >
Global page. You can also manually delete status entries.
Monitoring Status and Statistics
Unified Wired and Wireless Access System
Page 487