Wds Link Create; Figure 407: Wds Link Create; Table 373: Wds Link Create - D-Link DWL-8600AP User Manual

D-Link UWS User Manual
Command Buttons
The page includes the following buttons:
• Add—Allows you to configure a new WDS link for the selected group. When you click Add, the WDS Link
Create page displays.
• Submit—Select the checkbox associated with a link to modify the Link Cost value. Click Apply to update
the switch with the value you enter.
• Delete— Deletes the selected WDS link.
• Refresh—Updates the page with the latest information.
Note: If no links have been configured for the selected WDS group, only the Add and Refresh buttons
display.

WDS Link Create

When you click Add from the WDS AP Link Configuration page, the WDS Link Create page displays. From this
page, you can create WDS links between APs in the WDS group.
Note: After you change WDS-Managed AP group settings, make sure you push the configuration to
other switches in the cluster.
The following table shows the fields available on the WDS Link Create page.
Field
Source AP MAC Address
Source AP Radio
Destination AP MAC Address
Destination Radio
D-Link
Oct. 2015

Figure 407: WDS Link Create

Table 373: WDS Link Create

Description
MAC Address of the source AP.
Note: The WDS links are bidirectional. The terms Source and Destination
simply help to differentiate between the WDS link endpoints.
The radio number of the WDS link endpoint on the source AP.
The MAC address of the destination AP in the group.
The radio number of the WDS link endpoint on the destination AP.
Configuring the Wireless Distribution System
Unified Wired and Wireless Access System
Page 649