Ip Dscp Mapping Configuration; Figure 220: Ip Dscp Mapping Configuration; Table 201: Ip Dscp Mapping Configuration Fields - D-Link DWL-8600AP User Manual

D-Link UWS User Manual
The Trust Mode Configuration page also displays the Current 802.1p Priority Mapping table. For information
about 802.1p priority mapping, see
To access the 802.1 priority mapping configuration page, click LAN > QoS > Class of Service > 802.1p Priority
Mapping in the navigation menu. For more information, see
• If you make changes to the Trust Mode Configuration page, click Submit to apply the changes to the
system.
• Click Restore Defaults to reset the selected interface (or all interfaces, if Global is selected) to the default
trust value.

IP DSCP Mapping Configuration

Use the IP DSCP Mapping Configuration page to map an IP DSCP value to an internal traffic class.
To display the IP DSCP Mapping Configuration page, click LAN >QoS > Class of Service > IP DSCP Mapping
Configuration in the navigation menu.
Field
Interface
IP DSCP Values
Traffic Class
• If you make changes to the page, click Submit to apply the changes to the system. Click Restore Defaults
to reset all interfaces to the default trust value.
D-Link
Oct. 2015
"Mapping 802.1p Priority" on page

Figure 220: IP DSCP Mapping Configuration

Table 201: IP DSCP Mapping Configuration Fields

Description
The menu contains all CoS configurable interfaces. The only option is Global,
which means that the IP DSCP mapping configuration applies to all interfaces
and cannot be applied on a per-interface basis.
Lists the IP DSCP values to which you can map an internal traffic class. The
values range from 0-63.
The traffic class is the hardware queue for a port. Higher traffic class values
indicate a higher queue position. Before traffic in a lower queue is sent, it
must wait for traffic in higher queues to be sent. Valid range is 0 to 7.
334.
"Mapping 802.1p Priority" on page
Unified Wired and Wireless Access System
Configuring Class of Service
334.
Page 337