Cos Interface Configuration; Figure 221: Interface Configuration; Table 202: Interface Configuration Fields - D-Link DWL-8600AP User Manual

D-Link UWS User Manual

CoS Interface Configuration

Use the CoS Interface Configuration page to apply an interface shaping rate to all ports or to a specific port.
To display the CoS Interface Configuration page, click LAN > QoS > Class of Service > CoS Interface
Configuration in the navigation menu.
Field
Interface
Interface Shaping Rate
• If you make changes to the page, click Submit to apply the changes to the system. Click Restore Defaults
to reset all interfaces to the default trust value.
D-Link
Oct. 2015

Figure 221: Interface Configuration

Table 202: Interface Configuration Fields

Description
Selects the CoS configurable interface to be affected by the Interface Shaping
Rate. Select Global to apply a rate to all interfaces. Select an individual port to
override the global setting.
Sets the limit on how much traffic can leave a port. The limit on maximum
transmission bandwidth has the effect of smoothing temporary traffic bursts
over time so that the transmitted traffic rate is bounded. The specified value
represents a percentage of the maximum negotiated bandwidth. The default
value is zero (0). Valid values are 0-100, in increments of 1. A value of 0 means
the maximum is unlimited.
Configuring Class of Service
Unified Wired and Wireless Access System
Page 338