Figure 33: Global Status; Table 28: Global Status Fields - D-Link DWL-8600AP User Manual

Dws-4000 series access points

Hide thumbs Also See for DWL-8600AP:

Table of Contents

D-Link UWS User Manual

Supported Mode

Last Update Time

Last Attempt Time

Last Attempt Status

Server IP Address

Figure 33: Global Status

Specifies the SNTP Version the client supports.

Specifies the SNTP modes the client supports. Multiple modes may be supported by

Specifies the local date and time (UTC) the SNTP client last updated the system clock.

Specifies the local date and time (UTC) of the last SNTP request or receipt of an

unsolicited message.

Specifies the status of the last SNTP request or unsolicited message for both unicast

and broadcast modes. If no message has been received from a server, a status of

Other is displayed. These values are appropriate for all operational modes:

• Other: None of the following enumeration values.

• Success: The SNTP operation was successful and the system time was updated.

• Request Timed Out: A directed SNTP request timed out without receiving a

response from the SNTP server.

• Bad Date Encoded: The time provided by the SNTP server is not valid.

• Version Not Supported: The SNTP version supported by the server is not

compatible with the version supported by the client.

• Server Unsynchronized: The SNTP server is not synchronized with its peers. This

is indicated via the 'leap indicator' field on the SNTP message.

• Server Kiss Of Death: The SNTP server indicated that no further queries were to

be sent to this server. This is indicated by a stratum field equal to 0 in a message

received from a server.

Specifies the IP address of the server for the last received valid packet. If no message

has been received from any server, an empty string is shown.

Configuring SNTP Settings

Unified Wired and Wireless Access System

Show Quick Links

Table of Contents