Global Configuration; Figure 158: Lldp Global Configuration; Table 141: Lldp Global Configuration Fields - D-Link DWL-8600AP User Manual

Dws-4000 series access points

Hide thumbs Also See for DWL-8600AP:

Table of Contents

D-Link UWS User Manual

Global Configuration

Use the LLDP Global Configuration page to specify LLDP parameters that are applied to the switch.

To display the LLDP Global Configuration page, click LAN > L2 Features > LLDP > Global Configuration in the

navigation tree.

Transmit Interval

Transmit Hold Multiplier

Re-Initialization Delay

Notification Interval

• If you make any changes to the page, click Submit to apply the new settings to the system.

Specifies the interval at which LLDP frames are transmitted. The default is 30

seconds, and the valid range is 5-32768 seconds.

Specifies multiplier on the transmit interval to assign to TTL. The default is 4,

and the range is 2-10.

Specifies the delay before a re-initialization. The default is 2 seconds, and the

range is 1-10 seconds.

Limits the transmission of notifications. The default is 5 seconds, and the

range is 5-3600 seconds.

Unified Wired and Wireless Access System

Managing LLDP

Show Quick Links

Table of Contents