Viewing Managed Access Point Radio Statistics; Table 282: Managed Access Point Radio Statistics - D-Link DWL-8600AP User Manual

D-Link UWS User Manual

Viewing Managed Access Point Radio Statistics

The radio statistics show detailed information about the packets and bytes transmitted and received on the
radio (wireless) interface of a particular access point managed by the switch.
Use the options above the table to select the AP and radio with the settings to view. The AP is identified by its
MAC address and location. The radio is identified by its number and configured mode. If the radio is disabled,
the radio mode will be displayed as Off.
Table 282 describes the fields you see on the Radio page for the managed access point statistics.
Field
WLAN Packets Received
WLAN Bytes Received
WLAN Packets Transmitted
WLAN Bytes Transmitted
WLAN Packets Receive Dropped
WLAN Bytes Receive Dropped
WLAN Packets Transmit Dropped Number of packets transmitted by the AP on this radio interface that
WLAN Bytes Transmit Dropped
Fragments Received
Fragments Transmitted
Multicast Frames Received
Multicast Frames Transmitted
Duplicate Frame Count
Failed Transmit Count
Transmit Retry Count
Multiple Retry Count
RTS Success Count
RTS Failure Count
ACK Failure Count
FCS Error Count
D-Link
Oct. 2015

Table 282: Managed Access Point Radio Statistics

Description
Total packets received by the AP on this radio interface.
Total bytes received by the AP on this radio interface.
Total packets transmitted by the AP on this radio interface.
Total bytes transmitted by the AP on this radio interface.
Number of packets received by the AP on this radio interface that were
dropped.
Number of bytes received by the AP on this radio interface that were
dropped.
were dropped.
Number of bytes transmitted by the AP on this radio interface that were
dropped.
Count of successfully received MPDU frames of type data or
management.
Number of transmitted MPDU with an individual address or an MPDU
with a multicast address of type Data or Management.
Count of MSDU frames received with the multicast bit set in the
destination MAC address.
Count of successfully transmitted MSDU frames where the multicast bit is
set in the destination MAC address.
Number of times a frame is received and the Sequence Control field
indicates is a duplicate.
Number of times a MSDU is not transmitted successfully due to transmit
attempts exceeding either the short retry limit or the long retry limit.
Number of times a MSDU is successfully transmitted after one or more
retries.
Number of times a MSDU is successfully transmitted after more than one
retry.
Count of CTS frames received in response to an RTS frame.
Count of CTS frames not received in response to an RTS frame.
Count of ACK frames not received when expected.
Count of FCS errors detected in a received MPDU frame.
Monitoring Status and Statistics
Unified Wired and Wireless Access System
Page 482