Radius Server Configuration; Figure 282: Radius Server Configuration-Add Server; Figure 283: Radius Server Configuration-Server Added - D-Link DWL-8600AP User Manual

D-Link UWS User Manual RADIUS Settings

RADIUS Server Configuration

From the RADIUS Authentication Server Configuration page, you can add a new RADIUS server, configure
settings for a new or existing RADIUS server, and view RADIUS server status information. The RADIUS client on
the switch supports up to 32 named authentication and accounting servers.
To access the RADIUS Server Configuration page, click LAN > Security > RADIUS > RADIUS Authentication
Server Configuration in the navigation menu.
If there are no RADIUS servers configured on the system, or if you select Add from the RADIUS Server Host
Address menu, a subset of the fields described in the following table are available. After you enter the RADIUS
host address and click Submit, the additional configuration fields appear.
Figure 282: RADIUS Server Configuration—Add Server
If at least one RADIUS server is configured on the switch, and a host address is selected in the RADIUS Server
Host Address field, then additional fields are available on the RADIUS Server Configuration page.
Figure 283: RADIUS Server Configuration—Server Added
Unified Wired and Wireless Access System
D-Link
Oct. 2015 Page 413