D-Link DWL-8600AP User Manual page 718

D-Link UWS User Manual
2. Click the Manual Channel Plan tab.
3. Select the radio to run the channel plan on, and then click Start.
4. To view the channel plan that the ACA algorithm recommends, click Refresh.
The following figure shows that the ACA algorithm determined that the best operating channel for Radio
1 on AP_3 is channel 149, and not its current operating channel.
Note: If the ACA algorithm determines that the APs are currently operating on the best channel, the
Current Status field reports "Algorithm Complete: No Change Required."
5. To apply the suggested channel plan, click Apply.
Note: D-Link recommends that you apply the channel plan when WLAN traffic is low. When a radio
changes to a different channel, any associated clients are forced to disassociate and reassociate.
D-Link
Oct. 2015
Optimizing WLAN Traffic
Unified Wired and Wireless Access System
Page 718