D-Link UWS User Manual
User Login
Each configured user is assigned to a login list that specifies how the user should be authenticated when
attempting to access the switch or a port on the switch. After creating a new user account on the User Account
screen, you can use the User Login page to assign the user to a login list for the switch.
The pre-configured users, admin and guest, are assigned to a pre-configured list named defaultList, which you
may not delete. All newly created users are also assigned to the defaultList until you specifically assign them
to a different list. To create a new authentication list, see
To access the User Login page, click LAN > Administration > User Login in the navigation tree.
Field
User
Authentication List
D-Link
Oct. 2015
Figure 22: User Login
Table 17: User Login Fields
Description
The menu contains all configured users in the system and a Non-Configured
user. The Non-configured user is a user who does not have an account
configured on the switch. If you assign the Non-configured user to a login list
that specifies authentication via the RADIUS server, you will not need to
create an account for all users on each switch. However, by default the Non-
configured user is assigned to defaultList, which by default uses local
authentication.
Select the authentication login list you want to assign to the user for system
login.
"Creating an Authentication List" on page
Unified Wired and Wireless Access System
User Login
83.
Page 87