Ip Acl Rule Configuration; Figure 240: Ip Acl Rule Configuration (Create Rule) - D-Link DWL-8600AP User Manual

D-Link UWS User Manual
The ACL Table at the bottom of the page shows the current size of the ACL table versus the maximum size of
the ACL table. The current size is equal to the number of configured IPv4 and IPv6 ACLs plus the number of
configured MAC ACLs. The maximum size is 100.
• To add an IP ACL, select the type of ACL to add from the IP ACL menu, enter an ACL ID in the appropriate
field, and then click Submit.
• To delete an IP ACL, select the ACL ID from the IP ACL menu, and then click Delete. The Delete button only
appears if a configured IP ACL is selected.

IP ACL Rule Configuration

Use the IP ACL Rule Configuration page to define rules for IP-based ACLs created using the IP Access Control
List Configuration page. The access list definition includes rules that specify whether traffic matching the
criteria is forwarded normally or discarded. Additionally, you can specify to assign traffic to a particular queue
and/or mirror the traffic to a particular port.
Note: There is an implicit "deny all" rule at the end of an ACL list. This means that if an ACL is applied
to a packet and if none of the explicit rules match, then the final implicit "deny all" rule applies and
the packet is dropped.
To display the IP ACL Rule Configuration page, click LAN > QoS > Access Control Lists > IP Access Control Lists
> Rule Configuration in the navigation menu.
The fields available on the page depend on whether you select a standard, extended, or named IP ACL from
the IP ACL field, whether the rule action is permit or deny, and whether you select Create Rule or an existing
rule from the Rule field.
Figure 240 shows the fields available when Create Rule is selected in the Rule field.
D-Link
Oct. 2015

Figure 240: IP ACL Rule Configuration (Create Rule)

Configuring IP Access Control Lists
Unified Wired and Wireless Access System
Page 358