Sntp Server Status; Figure 32: Sntp Server Status; Table 27: Sntp Server Status Fields - D-Link DWL-8600AP User Manual

D-Link UWS User Manual
• To add an SNTP server, select Create from the Server list, complete the remaining fields as desired, and
click Submit. The SNTP server is added, and is now reflected in the Server list. You must perform a save to
retain your changes over a power cycle.
• To removing an SNTP server, select the IP address of the server to remove from the Server list, and then
click Delete. The entry is removed, and the device is updated.

SNTP Server Status

The SNTP Server Status page displays status information about the SNTP servers configured on your switch.
To access the SNTP Server Status page, click LAN > Monitoring > SNTP Summary > Server Status in the
navigation menu.
Field
Address
Last Update Time
Last Attempt Time
D-Link
Oct. 2015

Figure 32: SNTP Server Status

Table 27: SNTP Server Status Fields

Description
Specifies all the existing Server Addresses. If no Server configuration exists, a
message saying "No SNTP server exists" flashes on the screen.
Specifies the local date and time (UTC) that the response from this server was
used to update the system clock.
Specifies the local date and time (UTC) that this SNTP server was last queried.
Configuring SNTP Settings
Unified Wired and Wireless Access System
Page 100