Ip Helper Interface Configuration; Figure 181: Ip Helper Interface Configuration; Table 164: Ip Helper Interface Configuration Fields - D-Link DWL-8600AP User Manual

Dws-4000 series access points

Hide thumbs Also See for DWL-8600AP:

Table of Contents

D-Link UWS User Manual

IP Helper Interface Configuration

Use the IP Helper Interface Configuration page to configure per-interface relay settings.

To display the page, click LAN > L3 Features >IP Helper > Interface Configuration in the navigation tree.

Source IP Interface

UDP Destination Port

Server Address

Select the interface from the pull down menu to get the relay entries

configured on a particular interface. Select All to display all the configured

relay entries on all interfaces.

Shows the destination UDP port ID/Port Name of UDP packets to be relayed.

Shows the Server Address to which the packets with the given UDP

Destination Port will be relayed.

If True, packets arriving on the given interface with the given destination UDP

port are discarded rather than relayed. Discard entries are used to override

global IP helper address entries which otherwise might apply to a packet.

Shows the number of times a packet has been forwarded or discarded

according to this entry.

To delete a configured helper entry, select the Remove check box for the

appropriate entry and click Submit.

Configuring the IP Helper Features

Unified Wired and Wireless Access System

Show Quick Links

Table of Contents