Dns Host Name Ip Mapping Summary; Figure 69: Dns Host Name Ip Mapping Summary; Table 61: Dns Host Name Ip Mapping Summary Fields - D-Link DWL-8600AP User Manual

D-Link UWS User Manual

DNS Host Name IP Mapping Summary

Use this page to configure static and dynamic DNS host names for hosts on the network. The host names are
associated with IPv4 or IPv6 addresses on the network, which are assigned to particular hosts.
To access this page, click LAN > Monitoring > DNS Server > Host Name IP Mapping Summary in the navigation
tree.
Field
DNS Static Entries
Host Name
Inet Address
Remove
DNS Dynamic Entries
Host Name
Total
Elapsed
Type
Addresses
Remove
• Click Add Static Entry to load the Host Name IP Mapping Configuration page in order to configure the
Host Name IP Mapping entries.
• Click Submit to apply the new configuration and cause the change to take effect immediately. These
changes will not be retained across a power cycle unless a Save is performed.
• Click Clear Dynamic Entries to remove all Host Name IP Mapping entries. A confirmation prompt will be
displayed. Click the button to confirm removal and the Host Name IP Mapping dynamic entries are
cleared.
• Click Refresh to refresh the page with the most current data from the switch.
D-Link
Oct. 2015

Figure 69: DNS Host Name IP Mapping Summary

Table 61: DNS Host Name IP Mapping Summary Fields

Description
The host name of the static entry.
The IP4 or IPv6 address of the static entry.
Select to remove a Host Name IP Mapping entry from the Host Name IP
Mapping list.
The host name of the dynamic entry.
The total time of the dynamic entry.
The elapsed time of the dynamic entry.
The type of the dynamic entry.
The IP4 or IPv6 address of the dynamic entry.
Select to remove a Host Name IP Mapping entry from the Host Name IP
Mapping list.
Configuring DNS
Unified Wired and Wireless Access System
Page 148