Adding A Local User; Figure 268: Adding A New User; Table 228: Local User Configuration - D-Link DWL-8600AP User Manual

D-Link UWS User Manual

Adding a Local User

When you click Add from the Local User Summary page, the screen refreshes, and you can add a new user to
the Local User database. To configure additional parameters for the new user, return to the Local User
Summary page and click the name of the new user. The captive portal Global Status page displays the
maximum number of users the Local User database supports.
The following table describes the fields available when you add a new user to the local CP database. After you
complete the fields, click Add to add the user and return to the Local User Summary page.
Field Description
User Name Enter the name of the user.
Password Enter a password for the user. The password length can be from 8 to 64 characters.
User Group Assign the user to at least one User Group. To assign a user to more than one group,
press the Ctrl key and click each group.
New users are assigned to the 1-Default user group by default.
D-Link
Oct. 2015

Figure 268: Adding a New User

Table 228: Local User Configuration

Captive Portal Configuration
Unified Wired and Wireless Access System
Page 396