Managing Ip Subnet-Based Vlans; Figure 102: Ip Subnet-Based Vlan Configuration; Table 88: Ip Subnet-Based Vlan Configuration Fields - D-Link DWL-8600AP User Manual

Dws-4000 series access points

Hide thumbs Also See for DWL-8600AP:

Table of Contents

D-Link UWS User Manual

Managing IP Subnet-Based VLANs

If a packet is untagged or priority- tagged, the device associates the packet with any matching IP subnet

classification. If no IP subnet classification can be made, then the packet is subjected to the normal VLAN

classification rules of the device. An IP subnet-to-VLAN mapping is defined by configuring an entry in the IP

subnet-to-VLAN table. An entry is specified by a source IP address, network mask, and the desired VLAN ID.

The IP subnet-to-VLAN configurations are shared across all ports of the switch.

Use the IP Subnet-based VLAN Configuration page to assign an IP Subnet to a VLAN.

To display the IP Subnet-based VLAN Configuration page, click LAN > L2 Features> VLAN > IP Subnet-based

VLAN > Configuration in the navigation menu.

• If you make any changes on this page, click Submit to apply the changes to the system.

• To delete an existing binding, select the source IP address from the IP Address drop-down menu, and

then click Delete.

Select the IP address of the IP-to-VLAN binding to view or delete, or select Add

to create a new binding.

Specifies packet source IP address. This field is configurable only when you

create a new IP Subnet-based VLAN. Enter the IP address in dotted decimal

Specifies packet source IP subnet mask address.This field is configurable only

when you create a new IP Subnet-based VLAN. Enter the subnet mask in

dotted decimal notation.

Specifies the VLAN to which the IP address is assigned. The valid range is 1-

Managing VLANs

Unified Wired and Wireless Access System

Show Quick Links

Table of Contents