Downloading A File To The Switch - D-Link DWL-8600AP User Manual

D-Link UWS User Manual
Field
TFTP File Name
Start File Transfer
File Transfer Status

Downloading a File to the Switch

Before you download a switch to the file, the following conditions must be true:
• The file to download from the TFTP server is on the server in the appropriate directory.
• The file is in the correct format.
• The switch has a path to the TFTP server.
Use the following procedures to download a file from a TFTP server to the switch.
1. From the File Type field, select the type of file to download.
2. If you are downloading a D-Link DWS-4000 Series image (Code), select the image on the switch to
overwrite. If you are downloading another type of file, the Image field is not available.
Note: It is recommended that you not overwrite the active image.
3. Verify the IP address of the TFTP server and ensure that the software image or other file to be downloaded
is available on the TFTP server.
4. Complete the TFTP Server IP Address and TFTP File Name (full path without TFTP server IP address) fields.
5. Click the Start File Transfer check box, and then click Submit.
After you click Submit, the screen refreshes and a "File transfer operation started" message appears. After
the software is downloaded to the device, a message appears indicating that the file transfer operation
completed successfully.
To activate a software image that you download to the switch, see
D-Link
Oct. 2015
Table 74: Download File to Switch Fields (Cont.)
Description
Enter the name of the file you want to download from the TFTP server. You
may enter up to 32 characters. The factory default is blank.
To initiate the download, check this box before clicking Submit.
Indicates the current status of the file transfer process
Download File To Switch (TFTP)
"Multiple Image Service" on page
Unified Wired and Wireless Access System
176.
Page 173