Peer Switch Configuration Enable/Disable; Figure 393: Peer Switch Configuration Enable/Disable; Table 360: Peer Switch Configuration Enable/Disable - D-Link DWL-8600AP User Manual

D-Link UWS User Manual

Peer Switch Configuration Enable/Disable

You can copy portions of the switch configuration from one switch to another switch in the cluster. The Peer
Switch Configuration Enable/Disable page allows you to select which parts of the configuration to copy to one
or more peer switches in the group.
You can make changes to a configuration that has been sent to one or more peer switches, and you can make
changes to a configuration received from a peer switch. No changes automatically propagate from one switch
to the cluster; you must manually initiate a request on one switch in order to copy any configuration to its
peers.
The following table shows the fields on the detail page for Peer Switch Configuration Enable/Disable page.
Field
Global
Discovery
D-Link
Oct. 2015

Figure 393: Peer Switch Configuration Enable/Disable

Table 360: Peer Switch Configuration Enable/Disable

Description
Enable this field to include the basic and advanced global settings in the configuration
that the switch pushes to its peers. The configuration does not include the switch IP
address since that is a unique setting.
To view current basic global settings, click the WLAN > Administration > Basic Setup >
Global tab. To view current advanced global settings, click the WLAN > Advanced
Configuration > Global page.
Enable this field to include the L2 and L3 discovery information, including the VLAN list
and IP list, in the configuration that the switch pushes to its peers.
To view the discovery settings on the local switch, click the WLAN > Administration >
Basic Setup > Discovery tab.
Configuring Advanced Settings
Unified Wired and Wireless Access System
Page 628