D-Link UWS User Manual
Viewing Peer Switch Configuration Status
You can push portions of the switch configuration from one switch to another switch in the cluster. The Peer
Switch Configuration Status page displays information about the configuration sent by a peer switch in the
cluster. It also identifies the IP address of each peer switch that received the configuration information.
Note: To view information about the configuration received by the local switch, go to the WLAN >
Monitoring > Global page and click the Configuration Received tab.
Table 266
describes the fields available on the Peer Switch Status page.
Field
Peer IP Address
Configuration Switch IP
Address
Configuration
Timestamp
D-Link
Oct. 2015
Figure 311: Peer Switch Configuration Status
Table 266: Peer Switch Configuration Status
Description
Shows the IP address of each peer wireless switch in the cluster that received
configuration information.
Shows the IP Address of the switch that sent the configuration information.
Identifies which parts of the configuration the switch received from the peer switch.
The possible configuration elements can be one or more of the following:
• Global
• Discovery
• Channel/Power
• AP Database
• Channel/Power
• AP Profiles
• Known Client
• Captive Portal
• RADIUS Client
• QoS ACL
• QoS DiffServ
If the switch has not received any configuration for another switch, the value is None.
Shows when the configuration was applied to the switch. The time is displayed as
UTC time and therefore only useful if the administrator has configured each peer
switch to use NTP
Monitoring Status and Statistics
Unified Wired and Wireless Access System
Page 460