Viewing Details About Ap Authentication Failures; Figure 317: Ap Authentication Failure Details; Table 286: Access Point Authentication Failure Details - D-Link DWL-8600AP User Manual

D-Link UWS User Manual

Viewing Details About AP Authentication Failures

To view additional data (beacon information) for an AP in the authentication failure list, click the MAC address
of the AP.
The following table describes the fields on the detailed Access Point Authentication Failure Status page.
Field
MAC Address
IP Address
Last Failure Type
Vendor ID
Protocol Version
Software Version
Hardware Type
Reporting Switch
Switch MAC Address
D-Link
Oct. 2015

Figure 317: AP Authentication Failure Details

Table 286: Access Point Authentication Failure Details

Description
The Ethernet address of the AP.
The network IP address of the AP.
Indicates the last type of failure that occurred, which can be one of the
following:
• Local Authentication
• No Database Entry
• Not Managed
• RADIUS Authentication
• RADIUS Challenged
• RADIUS Unreachable
• Invalid RADIUS Response
• Invalid Profile ID
• Profile Mismatch-Hardware Type
• AP Relink
Vendor of the AP software.
Indicates the protocol version supported by the software on the AP.
Indicates the version of software on the AP.
Hardware platform for the AP.
Shows whether the switch that reported the AP authentication failure is
the local switch or a peer switch.
Shows the IP address of the switch in the cluster that reported the AP
authentication failure.
Monitoring Status and Statistics
Unified Wired and Wireless Access System
Page 488