Editing A Backup User; Deleting A Backup User; Deleting All Backup Users; Listing Backup Users - Quantum DXi V-Series Manual

Editing a Backup User

Deleting a Backup User

Deleting All Backup
Users

Listing Backup Users

Listing Medium
Changers

Listing Tape Drives

Scanning Devices

Path To Tape CLI Commands
syscli --edit backupuser --name <backup_user_name> --password
<backup_user_password> [--desc <description>]
This CLI command allows the admin user to edit a backup application user.
• --desc: user description. Enclosed in double quotes if string contains spaces
or special characters.
syscli --del backupuser --name <backup_user_name>
This CLI command allows the admin user to delete a backup application user.
syscli --deleteall backupuser [--sure]
This CLI command allows the admin user to delete all existing backup
application users.
syscli --list backupuser
This CLI command provides a list of backup application users.
syscli --list medchanger
This CLI command provides a list of medium changers that are present on the
system now.
Note: This command only lists PTT (path-to-tape) devices. To see a list of VTL
(virtual tape library) devices, use the --list vtl command (see
Existing VTL and Its Attributes
syscli --list tapedrive --serialnumber <serialnumber>
This CLI command provides a list of tape drives that are present on a given
physical library.
• --serialnumber: Must be a valid physical library serial number. Use --list
medchanger to get all available medium changer serial numbers.
syscli --scan device
This CLI command allows the admin user to detect any physical tape library
attached to the system.
Quantum DXi-Series Command Line Interface (CLI) Guide
on page 12).
6-67081-09 Rev B
February 2014
Listing
121