Visual Inspection; A/T Basic Check - Suzuki Grand Vitara XL-7 Service Manual

VISUAL INSPECTION

Visually check following parts and systems.
D A/ T fluid – – – – – level, leakage, color
D A/ T fluid hoses – – – – – disconnection, looseness, deterioration
D Accelerator cable – – – – – play, installation
D A/ T select cable – – – – – installation, operation
D Engine oil – – – – – level, leakage
D Engine coolant – – – – – level, leakage
D Battery – – – – – fluid level, corrosion of terminal
D Connectors of electric wire harness – – – – – disconnection, friction
D Fuses – – – – – burning
D Parts – – – – – installation, damage
D bolt – – – – – looseness
D Other parts that can be checked visually
D Also check following items at engine start, if possible.
– "O / D OFF" lamp – – – – – Operation
– Malfunction indicator lamp – – – – – Operation
– Charge warning lamp – – – – – Operation
– Engine oil pressure warning lamp – – – – – Operation
– Other parts that can be checked visually

A/T BASIC CHECK

This inspection is important for troubleshooting when TCM has detected no DTC and no abnormality has been
noted in visual inspection. Follow flow table carefully.
Step
1 Was "AUTOMATIC TRANSMISSION
DIAGNOSTIC FLOW TABLE" performed?
2 Perform "ROAD TEST" in this section.
Is it OK?
3 Perform "MANUAL ROAD TEST" in this section.
Is it OK?
4 Perform "ENGINE BRAKE TEST" in this section.
Is it OK?
5 Perform "STALL TEST" in this section.
Is it OK?
6 Perform "TIME LAG TEST" in this section.
Is it OK?
7 Perform "LINE PRESSURE TEST" in this
section.
Is it OK?
8 Proceed to "TROUBLE DIAGNOSIS TABLE 1"
in this section.
Is trouble identified?
9 Proceed to "TROUBLE DIAGNOSIS TABLE 2"
in this section.
Is trouble identified?
INSPECTION ITEM
Action
AUTOMATIC TRANSMISSION (4 A / T) 7B1-21
SECTION 0B
SECTION 7B1
SECTION 6E3
SECTION 7B1
SECTION 0B
SECTION 0B
SECTION 6
SECTION 8
SECTION 7B1
SECTION 6
SECTION 6H
SECTION 8 (SECTION 6A3 for
pressure check)
Yes
Go to Step 2.
Go to Step 3.
Go to Step 4.
Go to Step 5.
Go to Step 6.
Go to Step 7.
Go to Step 8.
Repair or replace
defective parts.
Repair or replace
defective parts.
REFERRING SECTION
No
Go to "AUTOMATIC
TRANSMISSION
DIAGNOSTIC FLOW TABLE".
Proceed to
"TROUBLESHOOTING" in
"ROAD TEST".
Proceed to
"TROUBLESHOOTING" in
"MANUAL ROAD TEST".
Proceed to
"TROUBLESHOOTING" in
"ENGINE BRAKE TEST".
Proceed to
"TROUBLESHOOTING" in
"STALL TEST".
Proceed to
"TROUBLESHOOTING" in
"TIME LAG TEST".
Proceed to
"TROUBLESHOOTING" in
"LINE PRESSURE TEST".
Go to Step 9.
Proceed to "TROUBLE
DIAGNOSIS TABLE 3" in this
section.