Suzuki Grand Vitara XL-7 Service Manual page 371

26) Remove oil plate mounting bolts (1) and then remove oil plate
(2) from intermediate case.
27) Remove circlip (1) from counter shaft.
Special tool
(A): 09900-06107
28) Remove bearing (1), spacer (2), counter shaft 5th gear (3) and
counter shaft 5th gear needle bearing by using puller (4).
29) Pull off 5th & reverse synchronizer ring assembly (1) and 5th
& reverse synchronizer sleeve (2) from counter shaft.
30) Remove spacer and circlip (1) from counter shaft (2) as shown
in the figure.
MANUAL TRANSMISSION 7A2-23