Suzuki Grand Vitara XL-7 Service Manual page 227

INSTALLATION
1) Install oil pump (1), oil pump chain (2) and oil pump drive sprock-
et (3) all together to cylinder block.
2) Install sprocket key.
3) Apply sealant to mating surface of gasket holder plate.
"A" Sealant: 99000-31150
4) Install gasket holder plate (1) to cylinder block.
5) Install crankshaft timing belt pulley (2).
6) Install oil pump strainer and oil pan referring to "OIL PAN AND
OIL PUMP STRAINER" in this section.
7) Install timing belt referring to "TIMING BELT AND BELT TEN-
SIONER" in this section.
8) Connect negative cable at battery.
ENGINE MECHANICAL (RHZ ENGINE) 6A3-29