Suzuki Grand Vitara XL-7 Service Manual page 402

7A2-54 MANUAL TRANSMISSION
44) Apply sealant to input shaft bearing retainer bolt and install in-
put shaft bearing retainer (1), new gasket and its bolts.
"A": Sealant 99000-31110
Tightening torque
Input shaft bearing retainer bolts (a):
25 N
45) Clean mating surface of rear case and apply sealant evenly to
rear case side of intermediate case in the same manner as
Step 41).
Sealant: 99000-31110
46) Install rear case to intermediate case.
Tightening torque
Rear case to intermediate case bolts (a):
38 N
47) With tip end of gear shift shaft inner lever (1) hooked on head
of gear shift shaft (2), insert gear shift inner shaft (3) into gear
shift shaft inner lever.
Upper side
.
m (2.5 kg-m, 18.0 lb-ft)
.
m (3.8 kg-m, 27.5 lb-ft)