Suzuki Grand Vitara XL-7 Service Manual page 503

7B1-98 AUTOMATIC TRANSMISSION (4 A / T)
16) Remove second brake hub assembly (1) from planetary sun
17) Remove 2 sun gear seal rings (1) from planetary sun gear.
ASSEMBLY
Assemble components by reversing disassembly procedure and
noting the following points.
D Snap both ends of sun gear seal ring (1) securely.
D Do not open sun gear seal ring more than necessary.
D Always use new O-ring and apply A/T fluid before installation.
D When installing O-ring, make sure that it is not kinked or caught.
D Push in brake piston horizontally.
D When installing brake piston return spring, be careful so that
spring will not fall or tilt.
D When installing snap ring, do not align lug (1) of retainer with
opening in snap ring (2).
D When installing brake discs, brake plates and clutch backing
plate, refer to the first figure of "CENTER SUPPORT" in this sec-
tion.
D Install clutch backing plate with its chamfered side facing brake
disc.
1. Clutch disc facing side
gear (2).
NOTE:
Use care not to open sun gear seal ring more than neces-
sary.