Suzuki Grand Vitara XL-7 Service Manual page 17

4) Apply engine oil to new oil filter O-ring.
5) Screw new filter on oil filter stand by hand.
6) Tighten filter to specified torque.
Special Tool
(A): 09915-46510
Tightening Torque
(a): 14 N
1. Oil filter
7) Replenish oil until oil level is brought to FULL level mark on dip-
stick. (about 4.75 liters or 10.0/8.4 US/Imp pt.).
NOTE:
Note that amount of oil required when actually changing oil
may somewhat differ from this data depending on various
conditions (temperature, viscosity, etc.)
8) Start engine and run it for three minutes. Stop it and wait another
5 minutes before checking oil level. Add oil, as necessary, to
bring oil level to FULL level mark on dipstick.
9) Check oil filter and drain plug for oil leakage.
1. LOW level mark
2. FULL level mark
MAINTENANCE AND LUBRICATION 0B-7
.
m (1.4 kg-m, 10.5 lb-ft)