CLEANING
D Clean oil pump strainer screen.
D Clean mating surfaces of oil pan and cylinder block.
Remove oil, old sealant, and dust from mating surfaces and in-
side of oil pan.
INSTALLATION
1) Apply sealant to oil pan mating surface continuously as shown
in figure.
"A" Sealant: 99000-31150
2) Using new gasket (1), install oil pump strainer (2) to oil pump.
Tighten strainer bolt (3) first and then bracket bolt (4) to specified
torque.
ENGINE MECHANICAL (RHZ ENGINE) 6A3-23