Suzuki Grand Vitara XL-7 Service Manual page 360

7A2-12 MANUAL TRANSMISSION
11) Lower transmission jack slowly, remove it from transmission
and install auxiliary arm (2) to transmission jack (1).
12) Raise transmission jack until it touches transmission.
13) Disconnect couplers from 4WD switch, back up light switch
and speed sensor assembly and release their harness from
clamps.
14) Remove engine to transmission bolts and nuts.
15) With transmission assembly held up on jack, move them to rear
and lower them.
WARNING:
Transmission assembly may tilt rearward on jack. It is
recommended to use an auxitiary arm of jack for pur-
pose of safety.
16) Remove wiring harness (3), harness clamp bolt and breather
hoses (4).
17) Separate gear shift lever case (5) and transfer assembly (2)
from transmission assembly (1).