Suzuki Grand Vitara XL-7 Service Manual page 307

ENGINE AND EMISSION CONTROL SYSTEM (RHZ ENGINE) 6E3-29
6) Tighten union nuts of high pressure supply pipe and high pres-
sure pipes to specified torque.
When tightening each union nut, hold union nuts of injector and
injection pump with wrench as shown.
Special Tool
(A): 09950-76510/OUT0000148
Tightening Torque
High pressure supply pipe union nut
.
(a): 20 N m (2.0 kg-m, 14.5 lb-ft)
High pressure pipe union nut
.
(b): 20 N m (2.0 kg-m, 14.5 lb-ft)
7) Install PCV hose (2) and bracket (1).
8) Install fuel temperature sensor referring to "FUEL TEMPERA-
TURE SENSOR" in this section.
9) Install intercooler referring to "INTERCOOLER" in this section.
10) Connect negative cable at battery.
11) Check fuel leakage by performing step 12) described in "FUEL
INJECTOR INSTALLATION" in this section.