Dtc P1169 (P0170) Condenser Voltage Function 1; Dtc P1170 (P0170) Condenser Voltage Function 2; Dtc P1101 (P0105) Barometric Pressure Sensor Circuit Malfunction - Suzuki Grand Vitara XL-7 Service Manual

Hide thumbs Also See for Grand Vitara XL-7:
Table of Contents

Advertisement

DTC P0561 (P0560) STABILIZATION OF SENSOR SUPPLY
DTC P0603/P0606/P1171/P1617 ECM FUNCTION

DTC P1169 (P0170) CONDENSER VOLTAGE FUNCTION 1

DTC P1170 (P0170) CONDENSER VOLTAGE FUNCTION 2

DTC P1101 (P0105) BAROMETRIC PRESSURE SENSOR CIRCUIT MALFUNCTION

WIRING DIAGRAM
DTC CONFIRMATION PROCEDURE
1) Connect scan tool to DLC with ignition switch OFF.
2) Turn ON ignition switch and clear DTC, pending DTC and freeze flame data by using scan tool.
3) Run engine at idle speed for 10 sec.
4) Check DTC and pending DTC by using scan tool.
TROUBLESHOOTING
STEP
1
Was "ENGINE DIAG. FLOW TABLE" performed?
NOTE:
If DTC is checked using generic scan tool only and DTC P1614 (P0560) and DTC P0560 (P0560) Diag. Flow
Tables are not performed yet, go to the table before ECM replacement.
ENGINE DIAGNOSIS (RHZ ENGINE WITH SINGLE-CONNECTOR ECM) 6-55
ACTION
YES
Substitute a known-
good ECM and
recheck. (See NOTE.)
1. Double relay
2. ECM
3. Ignition switch
4. "IG" fuse
5. Main fuse
6. To radiator fan relay No.3
NO
Go to "ENGINE DIAG.
FLOW TABLE".

Advertisement

Table of Contents
loading

Table of Contents