Chassis And Body - Suzuki Grand Vitara XL-7 Service Manual

1-1. Level gauge with HOT level mark
1-2. Level gauge with HOT and COLD level marks
- 2. FULL HOT mark
- 3. LOW HOT mark
- 4. FULL COLD mark
- 5. LOW COLD mark
1. Drain plug

CHASSIS AND BODY

ITEM 6-10
Manual Transmission Oil Inspection and Change
Inspection
1) Inspect transmission case for evidence of oil leakage.
Repair leaky point if any.
2) Make sure that vehicle is placed level for oil level check.
3) Remove level plug of transmission.
4) Check oil level.
Oil level can be checked roughly by means of level plug hole.
That is, if oil flows out of level plug hole or if oil level is found up
to hole when level plug is removed, oil is properly filled.
If oil is found insufficient, pour specified amount of specified oil.
5) Tighten level plug to specified torque.
Refer to Section 7A2 for installation and tightening torque.
Change
Change transmission oil with new specified oil referring to Section
1. Drain plug
7A2.
2. Filler / level plug
ITEM 6-11
Automatic Transmission Fluid Inspection and Change
Inspection
1) Inspect transmission case for evidence of fluid leakage.
Repair leaky point, if any.
2) Make sure that vehicle is placed level for fluid level check.
3) Check fluid level.
For fluid level checking procedure, refer to On-vehicle service in
Section 7B1 and be sure to perform it under specified conditions.
If fluid level is low, replenish specified fluid.
Change
1) Inspect transmission case for evidence of fluid leakage.
Repair leaky point, if any.
2) Make sure that vehicle is placed level for fluid level check.
3) Change fluid. For its procedure, refer to On-vehicle service in
Section 7B1.
1
MAINTENANCE AND LUBRICATION 0B-11