Suzuki Grand Vitara XL-7 Service Manual page 207

7) Remove crankshaft pulley.
If it is hard to remove, install crankshaft pulley bolt without
washer and use special tools.
Special Tool
(A): 09944-36011
8) Remove timing belt covers.
9) Remove fuel filter assembly.
10) Turn crankshaft so that crank timing pulley key (7) turns up, and
then lock camshaft hub (1) inserting special tool (A) into cylin-
der head hole (2) as shown in figure.
Special Tool
(A): 09910-26540/OUT0000151
11) Lock flywheel (MT) or drive plate (AT) inserting special tool (B)
into holes in both cylinder block and flywheel (MT) (or drive
plate (AT)) with crank timing pulley key turned up.
Special Tool
(B): 09910-26530/OUT0000160
12) Loosen timing belt tensioner bolt (3). Then remove timing belt
turning timing belt tensioner (4) clockwise with special tool (C).
Special Tool
(C): 09919-56550/OUT0000141
13) Remove timing belt tensioner and roller (5).
6. Starting motor
ENGINE MECHANICAL (RHZ ENGINE) 6A3-9