Suzuki Grand Vitara XL-7 Service Manual page 211

21) Install crankshaft pulley (1) with crankshaft locked by using flat
end rod (2) or the like, apply sealant to crankshaft pulley bolt
and tighten it gradually as follows.
a) Tighten bolt to 40 N
b) Tighten bolt to 195 N
about 50_.
Tightening Torque
Crankshaft pulley bolt (a): 195 N
Sealant:
"A": LOCTITE 273
22) Install bracket (1).
23) Install radiator referring to "RADIATOR" in Section 6B.
24) Refill cooling system referring to Section 6B.
25) Install generator belt referring to "GENERATOR BELT" in Sec-
tion 6H.
26) Connect negative cable to battery.
27) Check to make sure that there is no coolant leakage or fuel
leakage at hose connection.
ENGINE MECHANICAL (RHZ ENGINE) 6A3-13
.
m (4.0 kg-m, 29.0 lb-ft)
.
m (19.5 kg-m, 141 lb-ft) by turning it to
.
m (19.5 kg-m, 141 lb-ft)