7A2-20 MANUAL TRANSMISSION
11) Remove locating screws (1), locating springs (2) and locating
balls (3) as shown in the figure.
12) Remove low speed gear shift fork bolt (1).
13) Remove low gear shift shaft (2) and low speed gear shift fork
(1).
14) Remove interlock pin (1) and straight pin (2) by using magnet
(3).
NOTE:
When straight pin (2) can't be removed, push 5th reverse
gear shift shaft back and forth lightly, then remove strait
pin with magnet (3).
15) Remove circlip (1) from high speed gear shift shaft (2) as
shown in the figure.