Automatic Transmission Diagnostic Flow Table - Suzuki Grand Vitara XL-7 Service Manual

AUTOMATIC TRANSMISSION DIAGNOSTIC FLOW TABLE

Refer to the following pages for the details of each step.
Step
1 Customer Complaint Analysis
1) Perform customer complaint analysis referring
to the next page.
Was customer complaint analysis performed
according to instruction?
2 Diagnostic Trouble Code (DTC) Check, Record
and Clearance
1) Check for DTC
Is there any DTC(s)?
3 Visual Inspection
1) Perform visual inspection referring to the next
page.
Is there any faulty condition?
4 Visual Inspection
1) Perform visual inspection referring to the next
page.
Is there any faulty condition?
5 Trouble Symptom Confirmation
1) Confirm trouble symptom referring to the next
page.
Is trouble symptom identified?
6 Rechecking and Record of DTC
1) Recheck for DTC referring to "DTC CHECK" in
this section.
Is there any DTC(s)?
7 Rechecking and Record of DTC
1) Recheck for DTC referring to "DTC CHECK" in
this section.
Is there any DTC(s)?
8 Automatic Transmission Basic Inspection and
Trouble Diagnosis Table
1) Check and repair according to "A/T BASIC
CHECK" and "TROUBLE DIAGNOSIS TABLE"
in this section.
Are check and repair complete?
9 Troubleshooting for DTC
1) Check and repair according to applicable DTC
diag. flow Table.
Are check and repair complete?
10 Check for Intermittent Problems
1) Check for intermittent problems referring to the
next page.
Is there any faulty condition?
Action
AUTOMATIC TRANSMISSION (4 A / T) 7B1-13
Yes
Go to Step 2.
Print DTC or write them
down and clear them by
referring to "DTC
CLEARANCE" in this
section.
Go to Step 3.
Repair or replace
malfunction part.
Go to Step 11.
Go to Step 6.
Go to Step 9.
Go to Step 9.
Go to Step 11.
Repair or replace
malfunction part(s).
Go to Step 11.
No
Perform customer
complaint analysis.
Go to Step 4.
Go to Step 5.
Go to Step 8.
Go to Step 7.
Go to Step 8.
Go to Step 10.
Check and repair
malfunction part(s).
Go to Step 11.
Go to Step 11.