Suzuki Grand Vitara XL-7 Service Manual page 144

1.2 mm
2.3 mm
ENGINE DIAGNOSIS (RHZ ENGINE WITH TRIPLE-CONNECTOR ECM) 6-1-5
7) Install connector covers (1) to ECM harness connectors se-
curely.
8) Tighten harness clamps (2) with ECM harness and ECM har-
ness connector securely.
9) Connect ECM connector assemblies to ECM using connector
lock lever securely.
NOTE:
When clamp replacement is necessary, be sure to use a
clamp with width and thickness as specified below or less.
If a larger clamp is used, lock lever will be caught by clamp
and it will be impossible to install ECM connector to ECM.
Width: 2.3 mm
10) Install ECM to bracket referring to "ENGINE CONTROL MOD-
ULE" in Section 6E3.
Thickness: 1.2 mm