Suzuki Grand Vitara XL-7 Service Manual page 209

5) Install timing belt (1) with camshaft timing belt pulley (2) turned
clockwise within oblong hole (3) of camshaft timing belt pulley
as shown in figure.
6) Fit special tool as shown in figure.
Special Tool
(A): 09919-56560/OUT0000138
7) Turn timing belt tensioner counterclockwise using special tool
(B) until special tool (A) indicates 98 ± 2. Then tighten timing
belt tensioner bolt to specified torque.
Special Tool
(B): 09919-56550/OUT0000141
Tightening Torque
Timing belt tensioner bolt (a):
.
25 N m (2.5 kg-m, 18.0 lb-ft)
8) By removing camshaft timing belt pulley bolt (1), check to make
sure that bolt is not at the limit of bolt slot in pulley.
9) Install camshaft timing belt pulley bolts on camshaft timing belt
pulley.
Tighten bolts to specified torque.
Tightening Torque
Camshaft timing belt pulley bolt (b):
.
20 N m (2.0 kg-m, 14.5 lb-ft)
10) Remove all special tools and then turn crankshaft eight rota-
tions clockwise.
11) Install special tool referring to step 10) of "TIMING BELT AND
BELT TENSIONER REMOVAL".
ENGINE MECHANICAL (RHZ ENGINE) 6A3-11