Suzuki Grand Vitara XL-7 Service Manual page 372

7A2-24 MANUAL TRANSMISSION
31) Remove 5th & reverse synchronizer hub (1) by using puller (2).
32) Remove circlip (1) from main shaft (2) as shown in the figure.
33) Remove output bearing (1) and 5th gear (2) by using special
tool.
Special tool
(A): 09926-36510-001
(B): 09926-36510-002
(C): 09926-36510-003
34) Remove circlip (1) and then remove reverse gear (2) from main
shaft (3).
Special tool
(A): 09900-06107
35) Remove main and counter shaft bearing retainer (1).