6) After removing transmission case bolts, tapping transmission
rear case (1) flanges with plastic hammer, remove transmission
rear case.
7) Remove input shaft bearing retainer (1).
8) Remove C-ring (1) of input shaft bearing and C-ring (2) of count-
er shaft front bearing.
Special tool
(A): 09900-06107
9) Tapping transmission front case (1) flanges with plastic hammer,
remove transmission front case.
1
10) Set transmission intermediate case on vise securely.
NOTE:
Use aluminum plates between vise and intermediate case
to protect intermediate case against damage.
MANUAL TRANSMISSION 7A2-19