Suzuki Grand Vitara XL-7 Service Manual page 529

1
INSTALLATION
CAUTION:
Do not reuse flywheel bolts. Otherwise, engine oil may
leak. Be sure to use new bolts with pre-coated adhesive.
NOTE:
Before assembling, make sure that flywheel surface and pres-
sure plate surface have been cleaned and dried thoroughly.
1) Install flywheel to crankshaft and tighten new bolts (2) to
specification.
Special Tool
(A): 09924-17811
Tightening Torque
(a): 50 N
2) Using special tool, install input shaft bearing to flywheel.
Special Tool
(B): 09925-98210
3) Aligning clutch disc to flywheel center by using special tool,
install clutch cover and bolts. Then tighten bolts to specification.
NOTE:
While tightening clutch cover bolts, compress clutch disc
(C)
with special tool by hand so that disc centered.
Tighten cover bolts little by little evenly in diagonal order.
Special Tools
(A): 09924-17811
(C): 09923-36320
Tightening Torque
(b): 23 N
1. Clutch cover
.
m (5.0 kg-m, 36.5 lb-ft)
.
m (2.3 kg-m, 16.5 lb-ft)
CLUTCH 7C1-5