Suzuki Grand Vitara XL-7 Service Manual page 401

38) Apply thread lock cement to thred of fork bolt and tighten bolt
to specification.
"A": Cement 99000-32110
Tightening torque
Low speed gear shift fork bolt (a):
.
20 N m (2.0 kg-m, 14.5 lb-ft)
39) Install locating balls, locating springs and locating screws.
"A": Sealant 99000-31110
Tightening torque
Locating spring screws (a): 25 N
40) Place intermediate case assembly upright as shown in the fig-
ure by using workbench or the like.
41) Apply sealant evenly to front case side of intermediate case (1)
by using a nozzle (2) as shown in the figure by such amount
that its section is 1.5 mm (0.059 in.) in diameter.
"A": Sealant 99000-31110
42) Clean mating surface of front case and install it to intermediate
case.
43) Fix C-rings (1, 2) to bearings as shown in the figure.
Special tool
(A): 09900-06107
MANUAL TRANSMISSION 7A2-53
.
m (2.5 kg-m, 18.0 lb-ft)