Suzuki Grand Vitara XL-7 Service Manual page 502

4
11) After removing retaining back plate ring, remove clutch back-
ing plate, second brake plates and second brake discs.
12) Using special tool and hydraulic press, compress brake piston
return spring and remove snap second brake ring.
CAUTION:
Be careful when applying pressure, for overpressure
will cause plate section of piston return spring to de-
form.
Special tool
(A): 09926-98310
13) Remove brake piston return spring.
14) Blow air into the second air hole from the left and remove se-
cond brake piston. Then remove piston inner O-ring and piston
outer O-ring from second brake piston.
15) With second brake hub assembly (3) held stationary, turn plan-
etary sun gear (4) clockwise to check that it locks and then
counterclockwise to check that it turns smoothly.
[A]: Locks
[B]: Turns
AUTOMATIC TRANSMISSION (4 A / T) 7B1-97