Differential Case - Suzuki Grand Vitara XL-7 Service Manual

7F-10 DIFFERENTIAL (REAR)
3. Differential left case
5. Differential pinion

DIFFERENTIAL CASE

1) After applying differential oil to differential gear (4), pinions (5),
2) When installing pinion shaft No.2 (2) (shorter) into differential
3) Check differential pinion gear (1) for smooth rotation.
4) In the same manner as described in Step 1), install thrust washer
5) Install differential left case (1) and then tighten screws (2) to spe-
3. Differential right case
pinion shafts (6), thrust washer (2) and spring washer (1), install
them in differential right case (3).
For correct installing direction of thrust washer (2) and spring
washer (1), refer to the figure.
case and pinion, insert its "a" side into pinion joint (1).
NOTE:
"a" is longer than "b". ("a" > "b")
(2), spring washer (1) and differential gear (4).
cified torque.
"A": Cement 99000-32110
Tightening torque
Differential case screw (a):
.
9 N m (0.9 kg-m, 6.5 lb-ft)