Part Inspection And Correction Table - Suzuki Grand Vitara XL-7 Service Manual

7B1-78 AUTOMATIC TRANSMISSION (4 A / T)

PART INSPECTION AND CORRECTION TABLE

Part
Casted part, machined part
Bearing
Bushing, thrust washer
Oil seal, gasket
Gear
Splined part
Snap ring
Thread
Spring
Clutch disc, brake disc
Clutch plate, brake plate
Sealing surface (where lip
contacts)
Inspect for
Small flaw, burr
Deep or grooved flaw
Clogged fluid passage
Flaw on installing surface, residual gasket
Crack
Unsmooth rotation
Streak, pitting, flaw, crack
Flaw, burr, wear, burning
Flawed or hardened seal ring
Worn seal ring on its periphery or side
Piston seal ring, oil seal, gasket, etc.
Flaw, burr
Worn gear tooth
Burr, flaw, torsion
Wear, flaw, distortion
No interference
Burr
Damage
Settling, sign of burning
Wear, burning, distortion, damaged claw
Wear, burning, distortion, damaged claw
Flaw, rough surface, stepped wear, foreign
material
Correction
Remove with oil stone.
Replace part.
Clean with air or wire.
Remove with oil stone or replace
part.
Replace part.
Replace.
Replace.
Replace.
Replace.
Replace.
Replace.
Replace.
Replace.
Correct with oil stone or replace.
Replace.
Replace.
Replace.
Replace.
Replace.
Replace.
Replace.
Replace.