Manipulating Parameters (Pn); Parameter Classification - YASKAWA SGD7S Product Manual

5.1 Manipulating Parameters (Pn)

5.1.1 Parameter Classification

5.1 Manipulating Parameters (Pn)
This section describes the classifications, notation, and setting methods for the parameters
given in this manual.
5.1.1

Parameter Classification

There are the following two types of SERVOPACK parameters.
Classification
Setup Parameters
Tuning Parameters
Information
The setting method for each type of parameter is described below.
Setup Parameters
You can use the Panel Operator, Digital Operator, or SigmaWin+ to set the setup parameters
individually.
Information
5-4
Parameters for the basic settings that are
required for operation.
Parameters that are used to adjust servo
performance.
The tuning parameters are not displayed by default when you use the Panel Operator or Digital
Operator. To display and set the tuning parameters, set Pn00B to n.
ters).
Parameter

n. 0
(default setting)
Pn00B

n. 1
We recommend that you use the Setup Wizard of the SigmaWin+ to easily set the required setup
parameters by setting the operating methods, machine specifications, and I/O signals according
to on-screen Wizard instructions.
Meaning
Meaning
Display only setup parameters.
Display all parameters.

1 (Display all parame-
When Enabled Classification
After restart Setup