9.4 Monitoring Product Life
9.4.2 Operating Procedure
9.4.2
Operating Procedure
Use the following procedure to display the installation environment and service life prediction
monitor dialog boxes.
1.
Click the
maWin+.
2.
Select Life Monitor in the Menu Dialog Box.
The Life Monitor Dialog Box will be displayed.
Information
9-16
Servo Drive Button in the workspace of the Main Window of the Sig-
With the Panel Operator or Digital Operator, you can use Un025 to Un02A to monitor this
information.
A value of 100% indicates that the SERVOPACK has
not yet been used. The percentage decreases as the
SERVOPACK is used and reaches 0% when it is time
to replace the SERVOPACK.