YASKAWA SGD7S Product Manual page 590

14.1 List of Parameters
14.1.2 List of Parameters
Parameter
No.
Pn50D
14-26
Name
Input Signal Selections
2
4
/ZCLAMP (Zero Clamping Input) Signal Allocation
0 Active when CN1-40 input signal is ON (closed).
1 Active when CN1-41 input signal is ON (closed).
2 Active when CN1-42 input signal is ON (closed).
3 Active when CN1-43 input signal is ON (closed).
4 Active when CN1-44 input signal is ON (closed).
5 Active when CN1-45 input signal is ON (closed).
6 Active when CN1-46 input signal is ON (closed).

n. X
7 The signal is always active.
8 The signal is always inactive.
9 Active when CN1-40 input signal is OFF (open).
A Active when CN1-41 input signal is OFF (open).
B Active when CN1-42 input signal is OFF (open).
C Active when CN1-43 input signal is OFF (open).
D Active when CN1-44 input signal is OFF (open).
E Active when CN1-45 input signal is OFF (open).
F Active when CN1-46 input signal is OFF (open).
/INHIBIT (Reference Pulse Inhibit Input) Signal Allocation
 
n. X
The allocations are the same as the /ZCLAMP
0 to F
(Zero Clamping Input) signal allocations.
/G-SEL (Gain Selection Input) Signal Allocation
 
n. X
The allocations are the same as the /ZCLAMP
0 to F
(Zero Clamping Input) signal allocations.
/P-DET (Polarity Detection Input) Signal Allocation

n.X
The allocations are the same as the /ZCLAMP
0 to F
(Zero Clamping Input) signal allocations.
Setting Setting Default
Range Unit Setting
0000 to
– 8888
FFFF
Continued from previous page.
Applicable When Classi-
Motors Enabled fication
After
– Setup
restart
Applicable
Reference
Motors
All page 6-24
Applicable
Reference
Motors
All page 6-38
Applicable
Reference
Motors
All page 8-66
Applicable
Reference
Motors
Linear page 5-28
Continued on next page.
Refer-
ence
–