Dimensions And Drill Pattern - Siemens SINAMICS G120 Hardware Installation Manual

Installing/Mounting

3.2 Dimensions and drill pattern

3.2 Dimensions and drill pattern
Dimensions, drill patterns and minimum distances
The dimension drawings for all frame sizes for the SINAMICS G120 Power Module PM240
are shown in the figures and not true to scale.
Figure 3-2
Table 3- 3
Minimum distances FSA
side by
side
above
below
front
22
Dimensions and drill pattern, FSA (HO 0.37 kW ... 1.5 kW)
Minimum distances for mounting
Note
30 mm At max. environmental temperature of 40° C (104° F) and with max. HO
1.18 inches load the Power Modules can be mounted adjacent to each other
100 mm
3.93 inches
100 mm
3.93 inches
40 mm Additional distance to the front with Control Unit CU240E
1.57 inches
65 mm Additional distance to the front with Control Units CU240S,
2.56 inches CU240S DP, CU240S PN, CU240S DP-F and CU240S PN-F
Hardware Installation Manual, 07/2009, A5E00807525B AD
Power Module PM240