Installing The Software; Installing The Avaya S8500 Media Server With An Avaya G650 Media Gateway December - Avaya S8500 Manual

Configuring the media server
The Microsoft Telnet application may be set to send a carriage return (CR) and line feed (LF) each time
you press Enter. The installation program sees this as 2 key presses. You need to correct this before you
copy the RP to the hard drive.
1
Click Start > Run to open the Run dialog box.
2
Type telnet
3
Type display
Sending only CR
then close the dialog box.
If message says
Sending both CR & LF
then continue with step 4.
4
Type
unset crlf
5
Type
display
Sending only CR
6
Close the dialog box.

Installing the software

1
Type telnet 192.11.13.6 and press Enter to view the first screen.
54
and press Enter to open a Microsoft Telnet session.
and press Enter to see the current settings. If message says
and press Enter.
and press Enter to verify that the settings changed. The message should say
NOTE:
Use a telnet session to access the information on the CD.
NOTE:
To navigate on these screens, use the arrow keys to move to an option, then press the space
bar to select the option. Press Enter to submit the screen.
Installing the Avaya S8500 Media Server with an Avaya G650 Media Gateway
December 2003